Suptronics X400V3.0 Hifi Audio Player Expansion Board Kit For Raspberry Pi 1 Model B+ / 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ Electrical & Tools

SKU: ELECTRICAL_&_TOOLS_EA7US4YN

In stock

$84.02

* Required Fields

$84.02
Sold By
Footwear Store
0 / 5

Details

- The X400 Upgrade V3.0 Complements The Product, The Pcb Redesigns And Rearranges All Ports, Uses A Lower Noise Ldo, Uses A High Efficiency Dc / Dc Converter, And Uses The Japanese Alps Volume Potentiometer
  • - Product Introduction: X400 V3.0 Is A Very Cost-Effective Sound Card For Raspberry Pi 1 Model B+ / 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+. It Uses I2S Audio Interface Solution And Supports 24-Bit / 192Khz High-Quality Sound, Can Be Connected To Other Audio Equipment Through Rca Lotus Socket; Built-In High-Fidelity Headphone Amplifier Can Easily Use Headphones Through Standard 3.5Mm Headphone Jack; Built-In Digital Amplifier Output Power Up To 2 X 30W Can Be Connected Directly Through The Terminal Block. It Makes It Easier For Players To Create A Lossless Music System Or Internet Radio
  • - It Is Recommended To Use Volumio, Runeaudio, Pimusicbox And Other Operating Systems
  • - High-Definition Audio Processing Capability Up To 192Khz/24Bit 
  • - Using Ti Original High Quality Audio Stereo Dac Chip ( Ti Pcm5122 ) 
  • - Dynamic Range Signal-To-Noise Ratio ( Snr ) Up To 112Db, Maximum Distortion Less Than 0.0019 Percent
  • - Adopt Ti Original High Quality Headphone Amplifier Chip ( Ti Tpa6133A ) 
  • - High-Fidelity Headphone Amplifier With Signal-To-Noise Ratio Up To 93Db 
  • - Using Ti Texas Instruments Digital Power Amplifier Chip ( Tpa3116D2 ) 
  • - The Maximum Power Of The Audio Amplifier Can Reach 2 X 30W ( 24Vdc Power Supply, Speaker Impedance 8 Ohm ) 
  • - Use High Sensitivity Infrared Receiver ( 38Khz ) 
  • - Powering The Dac With Ti's Very Low Noise Ldo ( Output Noise Less Than 10Μvrms ) 
  • - Adopt Japanese Alps Original Potentiometer To Adjust The Amp And Speaker Volume Smoothly 
  • - High Efficiency Step-Down Dc / Dc Converter Provides Stable Power Supply To The Motherboard, 6 - 26Vdc Input, 5.1V Maximum 3A Output 
  • - Keep 2 X 13Pin Raspberry Pi Gpio Pin Header For Additional Expansion 
  • - Use The I2S Audio Interface To Reduce Cpu Load 
  • - With Rca Output Socket, 3.5Mm Amp Socket, Speaker Terminal Block 
  • - Fully Compatible With Raspberry Pi 
  • - All-Aluminum Housing, All-Aluminum Volume Knob, Metal Switch, Etc. Can Create Raspberry Pi High-Quality Music Finished Player 
  • - Easy To Assemble By Yourself
    • Dimensions And Weight
    • Product Weight: 0.2340 Kg
    • Product Size: 9.00 X 6.00 X 6.00 Cm / 3.54 X 2.36 X 2.36 Inches
    • Package Weight: 0.3180 Kg
    • Package Size: 12.00 X 7.50 X 7.50 Cm / 4.72 X 2.95 X 2.95 Inches
      Package Contents
    • Package Contents: 1 X Expansion Board, 4 X Copper Pillar, 8 X M3*6Mm Screw, 1 X All-Aluminum Enclosure, 1 X Aluminum Volume Knob, 1 X Metal Power Switch, 4 X M2.5*28Mm Screw, 4 X Countersunk Screw, 1 X Inner Hexagonal L-Wrench, 1 X Adapter, 1 X Eu Plug Power Cable

    Reviews

    Write Your Own Review

    You're reviewing: Suptronics X400V3.0 Hifi Audio Player Expansion Board Kit For Raspberry Pi 1 Model B+ / 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ Electrical & Tools

    Product Tags

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Custom Tab 1

    Custom Tab 2